Color chart of Latonit fiber cement boards
Fiber cement boards for LATONIT facades are produced as painted on a production line basis. The boards, which are cut out by the right sizes, are ground from the face side and soaked with hidrophobic composition. It helps the facade panel to resist better to moisture, without allowing it to get inside material. Such impregnation considerably increases strength and frost resistance of the board. Also, end faces of the fiber cement sheets are ground and processed.
The primer composition is applied on a surface of boards. The following stage is simultaneous painting of front and back surfaces of the board. Front surface is painted in three layers, back surface is painted in two layers. Special protective varnish is applied on the painted board to increase streight of a paint-and-lacquer coating, its resistance to UV-radiation, to increase service life of the painted surface and resistance to impact of chemicals.
LATONIT fiber cement facade panels can be manufactured both smooth, and having "wood grain" texture. The finish coating of the panel can be made with gloss or flat protective varnish. The water-based paint and varnish compositions, safe for health and the environment, are used in the process of painting of the fiber cement boards.
Color chart of the fiber cement panels for facade finish:
- 10xx RAL Yellow hues
- 20xx RAL Orange hues
- 30xx RAL Red hues
- 40xx RAL Violet hues
- 50xx RAL Blue hues
- 60xx RAL Green hues
- 70xx RAL Grey hues
- 80xx RAL Brown hues
- 90xx RAL White and black hues